Download Free Word & PDF Label Printing Templates for Product LP21/63

• Rectangles with rounded corners
• Centralized layout
• Selvedge present
• Bleed not possible
• Feed direction not indicated
• Gaps between labels (horizontal only)

Special Feature: 

• Freezer Labels

Please note that this label size is sometimes manufactured with a label height that is more than 38.1 mm. If you find that your design is printing out slightly too small for your labels (i.e. the bottom of your printed template finishes just above the bottom edge of the last label on the sheet), you may want to try using our templates with extra height (these templates are set up with a label height of 38.3 mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the larger label height.

[If you are working in the landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “extra” template. If you make your own adjustments, you need to remember to alter the side margins.] 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware) and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2 mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.