Download Free Word & PDF Label Printing Templates for Product LP33/53

• Rectangles with rounded corners
• Centralized layout
• Selvedge present
• Bleed of 1.5 mm/1 mm (alternative: 1.5 mm/0.95 mm) possible
• Feed direction not indicated
• Gaps between labels (vertical and horizontal)

Special Feature: 

• Recycled Fluorescent Removable Labels

Please note that this label size is sometimes manufactured with a vertical pitch that is less than 24 mm.
If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a vertical pitch of 23.9 mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller vertical pitch.

[If you are working in the landscape the vertical pitch becomes the horizontal pitch; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “alternative” template. If you make your own adjustments, you need to remember to alter the side margins.] 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware) and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2 mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.